IBM V7000 User Manual

Chapter 5. IBM Flex System V7000 Storage Node GUI interface 245
5.9.1 Event Notification menu
This option is used to configure alerting and logging. Here we define the e-mail and SNMP
servers and the levels of alerting as preferred.
Clicking Event Notification opens the window shown in Figure 5-63. From this window, you
can configure email alerts (which is included in the Call Home function) and SNMP
monitoring, and define syslog servers and the message types.
Figure 5-63 Event notification window
For more information about Call Home, see Chapter 13, “Maintenance and troubleshooting”
on page 571.

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities