IDEC MICRO/I HG1P-ST32 Series User Manual

4 Operation
21-10 WindO/I-NV4 User’s Manual
The MICRO/I only plays a single sound file at a time. It cannot simultaneously play multiple sound files. Therefore, if
multiple trigger device addresses simultaneously change to 1 or if a sound file is set as the touch sound, the sound
file played changes according to the trigger conditions.
■ Touch sound (beep) and sound file by trigger device addresses
The touch sound’s beep and a sound file can be played simultaneously.
■ When touch panel is touched twice (before sound from first touch has finished playing)
For the same touch sound file, the one played later has priority.
If the touch panel is pressed twice (before the sound has finished playing from the first touch), playback of the sound
file stops and the same sound file plays again from the beginning.
4Operation
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
Touch Panel
Sound
ON
OFF
Trigger Device Address
1
0
Touch Sound
Sound
Beep
Touch Panel
ON
OFF
Touch Sound
Sound
Sound

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English