2 Downloading
24-14 WindO/I-NV4 User’s Manual
2.2 Download Dialog Box
This section describes items and buttons of the Download dialog box.
■ Communication Settings
■ Download Data
Selects data to be downloaded.
■ Download Runtime system
Select this check box to force download runtime system, irrespective of the runtime system version of the MICRO/I,
when downloading project data. Normally this option should not be used.
■ Download Fonts and Kanji Dictionary Data
Select this check box to download the following fonts and the dictionary data to the MICRO/I, when downloading
project data.
• Standard Fonts
• optional fonts are selected on the Font/Kanji Dictionary Data tab in the Project Settings dialog box
• Kanji Dictionary Data
For details, refer to Chapter 4 “3.16 Font/Kanji Dictionary Data Tab” on page 4-75.
Communicate with: Available computer devices are displayed.
Port: Available communication ports on the computer are displayed.
Change: Changes communication settings. Click this button to display the Communication Settings dialog
box. For details, refer to “1.3 Change Communication Settings” on page 24-5.
All: All project data is downloaded.
Modified Data Only: Only files that were updated since the previous download are downloaded.
If an upload fails, select All to download.
When the Use Kanji dictionary data check box on the Font/Kanji Dictionary Data tab in the Project
Settings dialog box is not selected, the Kanji dictionary data is not downloaded even if this check box is
selected. When this check box is cleared and a project download is executed, deletes the Kanji dictionary
data stored in the download destination.
To Next Page
Loading...
Need help?
General
