IDEC MICRO/I HG1P-ST32 Series User Manual

WindO/I-NV4 User’s Manual 24-31
6 System Information
24
Online Function
3 Check information about the runtime system and project data.
4 When you have finished checking the information, click OK.
5 Click Close.
This concludes checking system information.
• To check the optional fonts installed on the MICRO/I and the Kanji dictionary data, click Font/Kanji
Dictionary Data Information. The Font Information dialog box is displayed. For details, refer to “Font/
Kanji Dictionary Data Information Dialog Box” on page 24-33.
• To check information about the external memory device inserted in the MICRO/I, click External Memory
Device Information. The External Memory Device Information dialog box is displayed. For details, refer
to “External Memory Device Information Dialog Box” on page 24-33.
• To check the communication driver set for the project that is downloaded to the MICRO/I, click
Communication Driver Information. The Communication Driver Information dialog box is displayed.
For details, refer to “Communication Driver Information Dialog Box” on page 24-34.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English