WindO/I-NV4 User’s Manual 28-37
3 FTP Client Function
28
Maintenance
• Files cannot be copied or moved from the FTP server to the FTP server.
• When transferring files from external memory to external memory and HMI special internal relay LSM67 is
0, subfolders can be copied and moved up to five folders deep. When HMI special internal relay LSM67 is
changed from 0 to 1, subfolders cannot be copied or moved.
• The following single-byte characters cannot be used in the folder or file path configured by Fixed or
Specify the Location by Value of Device Address.
; : * ? " < > |
• Folder or File path that exceed the limits in Specify the Location by Value of Device Address and
folder or file path configured with characters that cannot be used are as follows.
- When the text of the folder or file path exceeds the maximum number of device addresses (no NULL),
the text stored in device addresses up to the maximum number of device addresses from the start is
configured.
- When a character that cannot be used is set, the text is up to that character.
• If the transfer destination is a MICRO/I configured as an FTP server, “A\” or “B\” must be specified at the
beginning of the path for each type of external memory.
Example 1: If the transfer destination is the “ALARMLOG” folder in the “HGDATA01” folder on the SD
memory card:
A\HGDATA01\ALARMLOG
Example 2: If the transfer destination is the “ALARMLOG” folder in the “HGDATA01” folder on the USB
flash drive:
B\HGDATA01\ALARMLOG
To Next Page
Loading...
Need help?
General
