WindO/I-NV4 User’s Manual 29-31
3 File Copy Function
29
Data Transfer Function
3.2 File Copy Operating Procedures
The following methods can be used to copy files between an SD memory card and a USB flash drive inserted in the
MICRO/I or to internally copy files on an SD memory card or on a USB flash drive.
• Using the USB Autorun function
For details, refer to Chapter 31 “2 USB Autorun Function” on page 31-22.
• Using Key Buttons, Multi-Buttons, or Multi-Commands
For details, refer to “3.3 Using Key Buttons, Multi-Buttons, or Multi-Commands to Copy Files” on page 29-32.
• Using the File Manager in the System Mode on the MICRO/I
For details, refer to “3.4 Using File Manager on the MICRO/I to Transfer Project Data” on page 29-33.