IDEC MICRO/I HG1P-ST32 Series User Manual

1 External Memory Devices
31-12 WindO/I-NV4 User’s Manual
Uploading
This procedure shows how to upload the project data from the External Memory Device folder on the external
memory device inserted in the computer, to the computer using WindO/I-NV4.
1 On the Home tab, in the Project group, click Upload.
The Select External Memory Device folder dialog box appears.
2 Select the external memory device drive, then click OK.
The Upload dialog box appears.
■ External Memory Device folder
Displays the folder specified in the Folder tree described next.
■ Folder
Specify the source folder for uploading the project data.
■ Drive
Specify the computer's drive assigned as the external memory device drive.
■ Network
Displays the Network Drive Assignment dialog box. This dialog allows you to specify a drive on the network.
3 Enter the location to Location, and then click Upload.
The Upload dialog box appears and the file upload begins.
When the upload is complete, a message box appears.

IDEC MICRO/I HG1P-ST32 Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1P-ST32 Series
Category	Control Panel
Language	English