5 User Communication
3-66 WindO/I-NV4 User’s Manual
Example 3
When the trigger condition is satisfied, the received data is stored in device addresses in the following order.
Example 4
When the trigger condition is satisfied, the received data is stored in device addresses in the following order.
Example 5
When the trigger condition is satisfied, the received data is stored in device addresses in the following order.
Data from the beginning of the received data to Constant (Hexadecimal) data is stored in the device address.
Constant (Hexadecimal) data is not stored.
Item Setting
Conversion Type ASCII to Hexadecimal
Device Address LDR100
Use Reference Device Address OFF
Number of bytes 2
Words 2
Variable OFF
Item Setting
Conversion Type ASCII to Decimal
Device Address LDR100
Use Reference Device Address OFF
Number of bytes 2
Words 2
Variable OFF
Item Setting
Conversion Type No conversion
Device Address LDR100
Use Reference Device Address OFF
Storage Method of data from Upper byte
Number of bytes 1
Words 3
Variable ON
0012hLDR100:
0034hLDR101:
ASCII to Hexadecimal
2
(32h)
Value of Device Address
1
(31h)
4
(34h)
3
(33h)
Received data
1
(31h)
2
(32h)
3
(33h)
4
(34h)
Order of reception
Words: 2
2 bytes
12LDR100:
34
(DEC)
(DEC)LDR101:
ASCII to Decimal
2
(32h)
Value of Device Address
1
(31h)
4
(34h)
3
(33h)
1
(31h)
2
(32h)
3
(33h)
4
(34h)
Order of reception
Words: 2
Received data
2 bytes
3100hLDR100:
3300hLDR101:
0000hLDR102:
1
(31h)
Value of Device Address
The stored data is smaller than the
size specified for Words.
0 is stored.
NUL
(00h)
3
(33h)
NUL
(00h)
1
(31h)
3
(33h)
ETX
(03h)
Order of reception
Words: 3
Received data
Upper Lower
from Upper byte
1 byte
Constant (Hexadecimal) data
Constant (Character) data
0 is stored.
Stored data
No
conversion
Insufficient by 1 word
0 is stored.
To Next Page
Loading...
Need help?
General
