1 Pilot Lamp
9-10 WindO/I-NV4 User’s Manual
■ Visible Condition
The Pilot Lamp is displayed while the condition is satisfied. The Pilot Lamp is hidden while the condition is not
satisfied.
Example: When Trigger Type is While ON and Device Address is LM0
While LM0 is 0, the condition is not satisfied and the Pilot Lamp is hidden.
While LM0 is 1, the condition is satisfied and the Pilot Lamp is displayed.
While OFF: Turns on the Pilot Lamp when the value of device address is 0.
While satisfying the condition:
Turns on the Pilot Lamp when the condition is satisfied.
Data Type: Selects the type of data handled by the conditional expression for the on condition.
This option can only be configured if While satisfying the condition is selected for Trigger Type.
For details, refer to Chapter 2 “1.1 Available Data” on page 2-1.
Device Address:
Specifies the bit device or the bit number of the word device to serve as the on condition.
This option can only be configured when While ON or While OFF is selected for Trigger Type.
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2
“5.1 Device Address Settings” on page 2-68.
Condition: Specifies the conditional expression for the on condition.
This option can only be configured when While satisfying the condition is selected for Trigger
Type.
Click to display the Trigger Condition Settings dialog box. For the conditional expression
configuration procedure, refer to Chapter 2 “5.2 Setting Conditional Expressions” on page 2-71.
Comment: Used for entering a comment for the on condition. The maximum number is 80 characters.
1
0
On On OnOff Off Off
Pilot Lamp status
Value of
device address
On OffOff OffOn On
Pilot Lamp status
Condition
Satisfied
Not satisfied
LM0
:
MICRO/I
0
LM0
:
1
Show
Condition
Not
satisfied
Condition
Satisfied
Hide
To Next Page
Loading...
Need help?
General
