WindO/I-NV4 User’s Manual 10-157
8 Alarm Log Display
10
Data Displays
â– (Show items detailed settings)
Each of the show items selected by the check boxes under Show Items can be configured in detail here.
â– Title
Select this check box to use text registered in Text Manager for Title in the (Show items detailed settings). The
Text ID message configured for Occurrence Time, Message, Recovery Time, and Confirmation Time is
displayed in (Show Items detailed settings).
Title: Double click the cell, and then enter the titles for the items to display. The maximum number is
100 characters.
Width: Specifies the number of characters to display (0 to 40). 1 is the width of a single-byte character,
2 is the width of a double-byte character.
Date: Selects the display type of the date from the following.
YY/MM/DD, MM/DD/YY, DD/MM/YY, MM/DD, DD/MM, non-display
Time: Selects the display type of the time from the following.
HH:MM, HH:MM:SS, non-display
• If the title contains a newline, the text after the newline is not displayed. However, if using a Windows
font for the selected text ID, all the characters are displayed.
• If the title contains a language not supported as standard by the OS, the characters may be garbled
when displaying the (Show items detailed settings). However, the downloaded data is correctly
displayed.
• If you change the display format for Date or Time, the number for Width is automatically adjusted.
• The text color for Message changes according to the alarm state. The text color for Message is
configured by Occurred Color, Recovered Color, and Confirmed Color on the Format tab.
Text ID: Specifies the Text Manager ID number (1 to 32000) when using text registered in Text Manager.
Click to display Text Manager.
This option can only be configured when the Use Text Manager check box is selected.
To Next Page
Loading...
Need help?
General
