91
5.3.5 Card jam in Output Hopper
A. Card jam in Output Hopper 1
Please separate Output Hopper as Figure
after disconnecting power adaptor and
communication cable at rear side.
Figure 131 Card jam in Output Hopper 1
B. Card jam in Output Hopper 2
If card is jammed on the card gate of Output
Hopper as Figure, please remove the jammed
card by pulling out.
Figure 132 Card jam in Output Hopper 2
C. Card jam in Output Hopper 3
If card is not on the card gate of Output
Hopper but card cartridge can’t be pulled up,
please push in and pull out a new card as
Figure.
Figure 133 Card jam in Output Hopper 3
To Next Page
Loading...
