95
5.4.3 Hybrid Flipper cleaning
A. Hybrid Flipper cleaning 1
Please separate Hybrid Flipper as Figure after
disconnecting power adaptor and
communication cable at rear side.
Figure 143 Hybrid Flipper cleaning 1
B. Hybrid Flipper cleaning 2
Please push a cleaning card into the card
gate of Hybrid Flipper until the cleaning card
is shown at the other side as Figure and clean
rollers by pushing in and pulling out the
cleaning card slowly and repeatedly.
Figure 144 Hybrid Flipper cleaning 2
5.4.4 Laminator cleaning
A. Laminator cleaning 1
Please turn the film cartridge lock lever to the
clockwise 90 degrees as Figure.
Figure 145 Laminator cleaning 1
To Next Page
Loading...
