Multitron - Incubation Shaker
Setup and Function
25 February 2019 Page 23 of 146
Stacking equipment
If necessary, up to three units can be stacked to save space.
Equipment can also be stacked subsequently but stacking must be
performed by the manufacturer’s qualified expert personnel or per-
sons authorised by the manufacturer.
If stacked equipment is operated, you have to keep in mind that the
maximum permissible rotation speed is limited for the top units in
the stack.
For a detailed description of the technical data and possible maxi-
mum rotation speeds of stacked equipment, see see chapter
12.3.1 "Rotation Speed Parameter (Shaker Drive)", page 132.
Overview of options
To be able to adapt the equipment to different application situa-
tions, the following options are available:
Internal or external cooling see chapter 4.1, page 34
Direct steam humidification see chapter 4.2, page 38
2
Removable intermediate base
Cable pass-through see chapter 4.9, page 47
To Next Page
Loading...