Multitron - Incubation Shaker
Setup and Function
Page 22 of 146 25 February 2019
Interior
1
Finned heating element and axial fans (in back
wall, not visible)
2 CO
2
and humidity sensor (optional)
3 Interior lighting (not visible)
4 Pt100 temperature sensor
5 Slide rail
6 Limit stop table pull-out
7 Door heating
8 Stop bar
9 Table
Brief description
The Multitron incubation shaker is used to cultivate micro-organ-
isms in a laboratory environment. The basic version of the equip-
ment is fitted with a shaker drive and a heater. Depending on
which version of the equipment you have bought, it will come with
either a 3 mm, 25 mm or 50 mm throw. A version with an adjusta-
ble throw (12.5, 19, 25 and 50 mm) is also available.
The equipment can be operated either locally, using the operating
panel on the front of the equipment, or remotely, using a computer
connected to the equipment via an Ethernet interface.
1
3
5
6
7 8
9
4
2
To Next Page
Loading...