Multitron - Incubation Shaker
Accessories
Page 52 of 146 25 February 2019
Tray with pin holders
For applications in which large numbers of microtitre or deep-well
plates need to be incubated, various trays with pin holders are
available. These enable loading with several layers of microtitre
and deep-well plates.
The plates can be stacked. This allows you to simultaneously incu-
bate up to 72 deep-well plates and up to 144 microtitre plates on
one M tray.
The trays are designed for plates with the dimensions 85.1 x 127
mm.
To ensure the cultures receive the optimum oxygen supply, spac-
ers can be placed between stacked plates. These are available in
two variants:
Ring spacers (10 mm high) are placed on the pins individu-
ally. Depending on the type of tray loading, this makes it pos-
sible to remove individual plates or stacks of plates.
Quickload spacers are long plastic strips (4 mm high) that
span across several plates, thus allowing you to save time
while loading.
Since all spacers are made of plastic, they cannot be autoclaved
as this would destroy them.
To Next Page
Loading...