Infors Multitron - Page 6

Multitron - Incubation Shaker
Table of Contents
Page 4 of 146 25 February 2019
7.5.6 Stopping the Timer Function ......................100
7.6 Using eve
®
to Operate the Equipment .......................101
7.7 Settings Menu (Option Function) ...............................103
7.7.1 Setting the Upper Limit for the
Rotation Speed ...........................................103
7.7.2 Setting the Upper Limit for the
Temperature ...............................................104
7.7.3 Setting the Lower Limit for the
Temperature ...............................................104
7.7.4 Setting the Brake Force for Halting the
Table ...........................................................104
7.7.5 Activating or Deactivating the Key Pad
Lock (with a PIN) ........................................105
7.7.6 Activating or Deactivating the Key Tone ....105
7.7.7 Setting the Interior Lighting .........................106
7.7.8 Activating or Deactivating the Timer
Function ......................................................106
7.7.9 Setting up Data Exchange via the
Ethernet ......................................................106
7.7.10 Setting the Height Above Sea Level
(Altimeter) ...................................................107
7.7.11 Activating or Deactivating the Door Alarm ..107
7.8 Setting the Variable Throw .........................................107
7.9 Switching Off the Equipment ......................................108
7.10 Behaviour in Case of Interrupted Power Supply ........108
8 Rectifying Faults ................................................................109
8.1 Alarm Messages ........................................................109
8.1.1 Parameter-Specific Alarm Messages .........109
8.1.2 Alarm Message RESTARTED ....................111
8.2 Faults and Error Messages ........................................111
8.2.1 Error Messages Explained .........................111
8.2.2 Fault Tables ................................................114
8.3 Replace Equipment Fuses .........................................118
8.4 Returning for Repair ...................................................118
9 Maintenance and Cleaning ................................................119
9.1 Maintenance ...............................................................119
9.2 Cleaning and Disinfection ..........................................120
9.2.1 Cleaning ......................................................120
9.2.2 Disinfection .................................................123
10 Transport and Storage .......................................................124
10.1 Transport ....................................................................124
10.2 Storage .......................................................................124