Infors Multitron - Page 89

Multitron - Incubation Shaker
Operation
25 February 2019 Page 87 of 146
Signs regarding the timer function
If the timer function is active, the following signs appear:
The sign Timer appears as soon as the timer function is active or if
the timer can be programmed.
The signs Time 1 and Time 2 indicate, that the duration of phase 1
(Time 1) respectively phase 2 (Time 2) can be entered.
The signs
Phase 1
and
Phase 2
indicate which phase is active or
for which phase the parameter setpoints can be entered:
 The sign is blinking: The phase is active.
 The sign is lit up: The parameter setpoints of the correspond-
ing phase can be entered.
If the cyclic change between phase 1 and phase 2 is active, the
sign cycle lights up.