Para.
No.
Address
Name
Value Range
Default
Unit
Change
Page
F5-01 62721
DO1/RO1 function
0: No output
1: AC drive in running
2: Ready to run
3: Fault output 1 (stop upon fault)
4: Fault output 2
5: Fault output 3
6: Abnormal output (direct output
upon fault or alarm)
7: Motor overload pre-warning
8: AC drive overload pre-warning
9: Motor overtemperature pre-warning
10: AC drive load loss output
11: Undervoltage state output
12: Output overcurrent
13: Frequency-level detection FDT1
output
14: Frequency-level detection FDT2
output
15: Frequency reach
16: Frequency 1 reach output
17: Frequency 2 reach output
18: Frequency upper limit reach
19: Frequency lower limit reach
(output at stop)
20: Frequency lower limit reach (no
output at stop)
21: Timing reach output
22: Accumulative power-on time reach
23: Accumulative running time reach
24: Current running time reach
25: Zero current state
26: Current 1 reach output
27: Current 2 reach output
28: IGBT temperature reach
3 - At once
“
F5-01
”
on page
260
List of Drive Unit Parameters
-157-
To Next Page
Loading...
