Inovance MD800 Series - Page 216

Parameter Group
-215-
F0-08
Preset frequency
Address:
61448
Min.:
0.00
Unit:
Hz
Max.: 655.35 Data type: UInt16
Default:
50.00
Change:
At once
Value Range:
0.00 Hz to 655.35 Hz
Description
This parameter defines the target frequency.
F0-09
Running direction
Address:
61449
Min.:
0
Unit:
-
Max.: 1 Data type: UInt16
Default:
0
Change:
At once
Value Range:
0: Same as default direction
1: Reverse to default direction
Description
You can change the rotation direction of the motor by modifying this parameter without changing the
motor wiring. Modifying this parameter is equivalent to exchanging any two of the motor's U, V, W
wires.
F0-10
Maximum frequency
Address:
61450
Min.:
50.00
Unit:
Hz
Max.: 600.00 Data type: UInt16
Default:
50.00
Change:
At stop
Value Range:
50.00 Hz to 600.00 Hz
Description
This parameter defines the maximum output frequency of the AC drive.
F0-11
Source of frequency upper limit
Address:
61451
Min.:
0
Unit:
-
Max.: 6 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0: Frequency upper limit reference (F0-12)
1: AI1
2: AI2
3: AI3
4: Reserved
5: Communication
6: Multi-speed reference
Description
0: Frequency upper limit reference (F0-12)
The frequency upper limit is set by F0-12.