Inovance MD800 Series - Page 281

Parameter Group
-280-
F8-04
Deceleration time 2
Address:
63492
Min.:
0.0
Unit:
s
Max.: 6500.0 Data type: UInt16
Default: Model dependent Change:
At once
Value Range:
0.0s to 6500.0s
Description
The AC drive provides four groups of deceleration time, which can be switched by using the DI
terminal. This parameter defines the second group of deceleration time.
F8-05
Acceleration time 3
Address:
63493
Min.:
0.0
Unit:
s
Max.: 6500.0 Data type: UInt16
Default: Model dependent Change:
At once
Value Range:
0.0s to 6500.0s
Description
The AC drive provides four groups of acceleration time, which can be switched by using the DI
terminal. This parameter defines the third group of acceleration time.
F8-06
Deceleration time 3
Address:
63494
Min.:
0.0
Unit:
s
Max.: 6500.0 Data type: UInt16
Default: Model dependent Change:
At once
Value Range:
0.0s to 6500.0s
Description
The AC drive provides four groups of deceleration time, which can be switched by using the DI
terminal. This parameter defines the third group of deceleration time.
F8-07
Acceleration time 4
Address:
63495
Min.:
0.0
Unit:
s
Max.: 6500.0 Data type: UInt16
Default: Model dependent Change:
At once
Value Range:
0.0s to 6500.0s
Description
The AC drive provides four groups of acceleration time, which can be switched by using the DI
terminal. This parameter defines the fourth group of acceleration time.
F8-08
Deceleration time 4
Address:
63496
Min.:
0.0
Unit:
s
Max.: 6500.0 Data type: UInt16
Default: Model dependent Change:
At once
Value Range:
0.0s to 6500.0s