Inovance MD800 Series - Page 298

Parameter Group
-297-
Description
This parameter shows the fault codes of the latest three (1st, 2nd, and 3rd (latest)) faults. The host
controller reads the communication address to obtain the fault code of the AC drive and triggers the
AC drive to report the fault. The fault code can be viewed on the operating panel.
F9-16
3rd (latest) fault type
Address:
63760
Min.:
0
Unit:
-
Max.: 99 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
0 to 99
Description
This parameter shows the fault codes of the latest three (1st, 2nd, and 3rd (latest)) faults. The host
controller reads the communication address to obtain the fault code of the AC drive and triggers the
AC drive to report the fault. The fault code can be viewed on the operating panel.
F9-17
Frequency upon the 3rd (latest) fault
Address:
63761
Min.:
0
Unit:
-
Max.: 0 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
-
Description
This parameter shows the frequency of the AC drive upon the latest fault.
F9-18
Current upon the 3rd (latest) fault
Address:
63762
Min.:
0
Unit:
-
Max.: 0 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
-
Description
This parameter shows the current of the AC drive upon the latest fault.
F9-19
Bus voltage upon the 3rd (latest) fault
Address:
63763
Min.:
0
Unit:
-
Max.: 0 Data type: UInt16
Default: Model dependent Change: Unchangeable
Value Range:
-
Description
This parameter shows the bus voltage of the AC drive upon the latest fault.
F9-20
Input terminal state upon the 3rd (latest) fault
Address:
63764
Min.:
0
Unit:
-
Max.: 0 Data type: UInt16