Inovance MD800 Series - Page 360

Parameter Group
-359-
Max.: 100.0 Data type: Int16
Default:
–30.0
Change:
At once
Value Range:
–100.0% to 100.0%
Description
This parameter defines the y-axis of inflection 1 on AI curve 5, that is, the percentage of the analog
input at inflection 1 relative to the maximum frequency.
A6-12
Curve 5 inflection point 2 input
Address:
42508
Min.:
–10.00
Unit:
V
Max.: 10.00 Data type: Int16
Default:
3.00
Change:
At once
Value Range:
–10.00 V to 10.00 V
Description
This parameter defines the x-axis of inflection 2 on AI curve 5, that is, the analog input voltage (or
analog input current) at inflection 2.
A6-13
Percentage corresponding to curve 5 inflection point 2 input
Address:
42509
Min.:
–100.0
Unit:
%
Max.: 100.0 Data type: Int16
Default:
30.0
Change:
At once
Value Range:
–100.0% to 100.0%
Description
This parameter defines the y-axis of inflection 2 on AI curve 5, that is, the percentage of the analog
input at inflection 2 relative to the maximum frequency.
A6-14
Curve 5 maximum input
Address:
42510
Min.:
–10.00
Unit:
V
Max.: 10.00 Data type: Int16
Default:
10.00
Change:
At once
Value Range:
–10.00 V to 10.00 V
Description
This parameter defines the x-axis of the maximum input point on AI curve 5, that is, the maximum
analog input voltage (or maximum analog input current).
A6-15
Percentage corresponding to curve 5 maximum input
Address:
42511
Min.:
–100.0
Unit:
%
Max.: 100.0 Data type: Int16
Default:
100.0
Change:
At once
Value Range:
–100.0% to 100.0%
Description
This parameter defines the y-axis of the maximum input point on AI curve 5, that is, the percentage of
the maximum analog input relative to the maximum frequency.