Inovance MD800 Series - Page 365

Parameter Group
-364-
A9-10
Speed fluctuation suppression coefficient of asynchronous motor in SVC mode
Address:
43274
Min.:
0
Unit:
-
Max.: 6 Data type: UInt16
Default:
3
Change:
At once
Value Range:
0 to 6
Description
This parameter defines the speed fluctuation suppression coefficient of the asynchronous motor in
SVC mode. The default value is recommended.
A9-11
Acceleration/Deceleration time of asynchronous motor in SVC mode
Address:
43275
Min.:
0.1
Unit:
s
Max.: 3000.0 Data type: UInt16
Default:
20.0
Change:
At once
Value Range:
0.1s to 3000.0s
Description
This parameter defines the acceleration/deceleration time of the asynchronous motor in SVC mode.
The default value is recommended.
A9-12
Quick auto-tuning of stator resistance before asynchronous motor startup
Address:
43276
Min.:
0
Unit:
-
Max.: 1 Data type: UInt16
Default:
0
Change:
At once
Value Range:
0: Disabled
1: Enabled
Description
This parameter defines whether to enable quick auto-tuning of the stator resistance of the
asynchronous motor before startup. The default value is recommended.
A9-13
Coefficient 1 of quick auto-tuning of asynchronous motor stator resistance
Address:
43277
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
10
Change:
At stop
Value Range:
0 to 65535
Description
This parameter defines coefficient 1 of quick auto-tuning of stator resistance of the asynchronous
motor.
A9-14
Coefficient 2 of quick auto-tuning of asynchronous motor stator resistance
Address:
43278
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
10
Change:
At stop
Value Range:
0 to 65535