Micromate Operator Manual – 721U0201 Revision 6 89
Establishing Connection Transferring Event
b. Stop Monitoring and Call Home
With Auto Call Home configured to stop monitoring and call home, the Micromate will respond
differently depending on the monitoring mode.
1) With the Micromate in waveform or histogram combo mode, the Micromate will pause
monitoring, complete the histogram event, if applicable, connect to the modem and
transfer the waveform and histogram event data back to the remote computer. Once the
transfer has been completed the Micromate will go back into monitor mode. The
Micromate will NOT be monitoring while it is transferring the event data.
Sample Record Mode Establishing Connection
Transferring Event
To Next Page
Loading...
