EasyManua.ls Logo

JAC T9 - Emergency Unlocking of P Gear

JAC T9
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
118
Starting and driving
Notice
● The vehicle can shift to M gear only
from D gear.
● The M gear is recommended for
accelerating and overtaking or
driving uphill and downhill.
● When the vehicle is running on a
bumpy road, ramp or other roads,
it is recommended to use the lower
gear of M gear.
● When M gear is engaged, if the
engine speed is too high or too low,
the transmission will automatically
shift to a proper gear to protect the
engine.
The parking brake cannot be released
when the vehicle is in M gear.
Emergency unlocking of P gear
Method I
If the gear shift cannot be switched from P
gear to other gears during normal operation,
the following 2 methods can be used for
emergency unlocking of P gear.
1. Stop the engine and apply the parking
brake.
2. Remove the cup holder gasket.
3. Pry up the circular cover plate with a
at-head screwdriver to see the cable
for unlocking P gear. Turn the P gear
unlocking cable handle counterclockwise
to make it enter the sliding chute.
4. After lifting the rope and lifting the
handle to the top, turn the P gear
unlocking cable handle clockwise. At
this time, there will be a slight "snap",
indicating that the handle is xed in
place and the P gear is unlocked. At this
time, if the vehicle is powered on or
started, an alarm sound will be given.
The instrument displays "Transmission
P Gear Fault" and the transmission is in
N gear.
5. The P gear unlocking cable handle can
be reset in the reverse operation steps.

Table of Contents

Related product manuals