86
Inspection and adjustment before driving
Anti-theft system
Engine anti-theft system
Vehicle anti-theft system
In order to prevent the vehicle from
being stolen, there is a signal transmitter
matching the vehicle inside the key. The
engine cannot be started unless a valid key
is used.
If the engine cannot be started, please
check the key according to the following
steps:
1.Check whether your key is valid.
2.Check whether the key battery is
sucient.
If there are no above problems, it is likely
that the engine electronic anti-theft system
fails. Please contact an after-sales service
provider for maintenance.
The vehicle anti-theft system can help to
prevent your vehicle and valuables from
being stolen. When someone tries to enter
the vehicle forcibly, the vehicle anti-theft
system will give an audible and visual
alarm.
Start of anti-theft system
1. Close all windows.
2. Turn the ignition switch to "OFF"
position for when starting vehicles
without keys.
3. Take the key and get o.
4. Close all doors and the hood.
5. Lock the vehicle.
Release of anti-theft system
The anti-theft mode will be released when
the vehicle is unlocked with mechanical
key, remote control function of key or
request switch on the door handle.
Warning
● Do not attempt to modify the vehicle
anti-theft system or add other
equipment.
Alarm triggering conditions
With the anti-theft system started, opening
any door will trigger an alarm. At this
time, the horn will sound and the hazard
alarm indicator will ash for about 90s.
Notice
● When the door is opened in any other
way, an alarm will be activated.
● If the doors are not opened or the
engine is not started within 30s after
the anti-theft system is released
with the smart key, all doors will be
locked automatically and the anti-
theft system will be restarted.
● When you lock the vehicle and
have a rest in the vehicle, using the
interior door handle to open the door
will also start the anti-theft system.
At this time, unlocking the vehicle
with the remote key can release the
alarm.