JAC T9 - Interior Cleaning

Cleaning and maintenance
207
1
2
3
4
5
6
7
8
Interior cleaning
The longer the stain remains on auto components, the harder it is to be cleaned and treated. Stain that remains on the surface of the
parts and components over a long period may not be cleaned.
Cleaning and maintenance of parts and components of vehicle are listed in the table below for reference.
Materials Conditions Recommendations
Window glass Dirt
Clean with the window glass cleaner, and then dry with clean leather
specialized for window cleaning or any bareface cloth.
Fabric
Microber cloth
Articial leather
Dirt and particles attached to the surface
Remove the dirt and particles with a vacuum cleaner on a regular basis,
and prevent the permanent damage caused by friction.
Water contaminants, such as coee, tea, etc.
Water contaminants shall be immediately removed with a cloth having
excellent water absorption and neutral soap.
Oil stains, such as machine oil, cosmetics, etc.
Apply with the neutral soap, and then remove the dissolved grease and
paint with a cloth having excellent water absorption. Wash with clean
water again where necessary.
Special dirt, such as ballpoint pen ink, nail
polish, latex paint, shoe polish, blood stain, etc.
Apply with the special stain remover, and wash with neutral soap again
where necessary.
Maintenance
Fabrics, microber fabrics, or articial leather shall not be treated
with leather curing agents, solvents, oor wax, shoe polish, or similar
substances.
Genuine leather
New dirt Immediately clean with cotton cloth and neutral soap.
Water contaminants, such as coee, tea, etc.
New stain: Remove with the soft cloth having excellent water
absorption.
Dry stain: It is suggested to remove the dry stain with the stain remover
applicable for leather treatment.