136
Starting and driving
Turn on or o the panoramic
parking camera system
ON
1.When the gear shift switch to R, the
system will enter the rearview image.
2.Touch the “ ” button on the multi-
media display, and if the vehicle is in
neutral, the system will display the 2D
surround view interface. If the vehicle
is in the forward gear, the system will
display the "2D + radar" image.
Display interface of panoramic
parking camera system
2D display image
Switch of the 2D display image
When the display image is a panoramic
Switch 2D to a 3D display image
Click the “ ” at the top right to
switch to a 3D display image. Click
the “ ”, and the interface will be
switched to the previous 2D display
image.
O
1. Switch the gear shift to the forward
gear, keep propelling speed of the
vehicle higher than 15 km/h for more
than 3 s, and leave the display image.
2. Click the sign “ ” at the top left of
the display screen and leave the display
image.
surround view, click the front/back/
left/right areas, and you can switch to
the corresponding "2D single view +
radar".
When the display image is the "2D
single view + radar", click the vehicle
model at the radar area and you can
switch to the 2D surround view.
To Next Page
Loading...
