JAC T9 - Traffic Sign Recognition （ TSR

170
Starting and driving
Notice
control of the vehicle" and emit
high-frequency audible alarm as a
reminder.
● When the camera is disturbed, such
as the lens being completely or
partially blocked by objects, strong
light, dirt on the lens, etc., and the
system cannot work normally, the
instrument will display "Please
remove the front obstruction of the
driver monitoring system".
● When the video monitoring system
cannot work normally due to a fault,
the instrument will display "Driver
monitoring system fault".
Trac Sign Recognition
（
TSR
）
The trac sign recognition function
recognizes the speed sign through the
camera on the front windshield, observes
the speed sign when the vehicle passes
by, and displays the speed sign on the
combination instrument panel to remind
the driver to pay attention to the speed.
The driver monitoring system is turned
on by default when the vehicle starts. It
cannot be manually deactivated, and the
instrument alarm sound can be turned o.
The driver monitoring system function
switch can be set in MP5, and the switch
status and functions are as follows:
ON: text and audible alarm prompts
OFF: text prompt only
Warning
● The trac sign information function
is only used to remind drivers to pay
attention to trac signs and is not
applicable to all situations. It cannot
replace the driver's judgment of road
speed limit information.
● In any case, drivers should be
responsible for the safety of the
vehicle, and must always drive with
caution and comply with applicable
laws and road trac rules.
Notice
● When the system detects that
the driver is in a distracted state
or cannot be recognized within
the camera's eld of view, the
instrument panel will display the
words "Please drive attentively" and
provide audible alarm at dierent
frequencies.
● When the system detects that the
driver is in a fatigued driving state,
the instrument panel will display
the message "Do not drive while
fatigued" and emit audible alarm at
dierent frequencies depending on
the severity of fatigue.
● When the system detects that the
driver's attention is not focused or
is in a fatigued state for an extended
period of time, and there is no
response to the alarm, the system
considers that the driver is in an
incapacitated state and unable to
drive properly. The instrument panel
will display the message "Take