58
Instruments and control
Front windshield wiper and
washer switches
1. Wiper control lever
2. Adjustment knob
When the ignition switch is in the "ON"
position, the front windshield wiper and
washer can be operated.
Wiper operation
Washer operation
MIST: When the wiper control lever is
pushed up from the "OFF" position to the
"MIST" position and released, the wiper
control lever automatically returns to the
"OFF" position and the wiper operates
once. If pushed to the "MIST" position
and not released, the wiper will continue
to wipe at low speed until you release the
wiper control lever.
OFF: When the wiper control lever is
in the "OFF" position, the wiper stops
working.
AUTO: When the wiper control lever
is in the "AUTO" position, the wiper
automatically operates according to the
amount of rain.
The interval of the wiper movement can
be adjusted through the adjustment knob
②
on the handle. Move up to increase the
wiper speed, and down to decrease the
wiper speed.
LO: When the wiper control lever is in the
"LO" position, the wiper will continuously
wipe at low speed.
HI: When the wiper control lever is in the
Gently pull the wiper control lever
backwards (towards the driver). The
washer will spray detergent onto the front
windshield. At the same time, the wiper
will continuously wipe at low speed until
the wiper control lever is released.
"HI" position, the wiper will continuously
wipe at high speed.
AUT O
To Next Page
Loading...
