JAC T9 - Brake Fluid Inspection

Maintenance and do-it-yourself
225
1
2
3
4
5
6
7
8
The brake uid in the brake uid reservoir
should be checked regularly. The liquid
level must always be between the MAX
and MIN marks. During driving, due to
wear and automatic adjustment of the brake
pad, the liquid level will drop slightly,
which is normal.
If, within a short period of time, the liquid
in the liquid reservoir drops signicantly
or drops below the MIN mark, the braking
system may be poorly sealed. If the level
of the brake uid in the uid reservoir is
too low, the braking system fault indicator
will light up. At this time, please check the
braking system at the after-sales service
shop immediately.
30 seconds. The pedal height should
remain unchanged.
4. Release the brake pedal, let the engine
run for 1 minute, and then turn o the
engine. Depress the brake pedal several
times. The travel of the brake pedal
gradually decreases with each depressing
because the vacuum in the booster
gradually disappears.
5. If the brake booster is not working
properly, please check the braking
system at the after-sales service shop as
soon as possible.
Brake uid
Brake uid inspection
MAX
MIN