Emergency
189
1
2
3
4
5
6
7
8
Removal of spare tires
1. Two lifting levers
④
, cranking bar
⑦
and wheel nut wrench
⑤
are combined
as shown in the gure to form a
combined crank, the middle part of
which is secured with screws.
3. Rotate the wheel nut wrench
⑤
counterclockwise on the other end of the
combined crank, and the spare tire will
slowly drop from the vehicle chassis to
the ground. Take out the spare tire.
4. Put it back in the reverse order of the
removal operation.
2. Insert the cranking bar
⑦
of the
combined crank into the central oval
opening below the tailgate panel and
engage it with the opening slot of the
spare tire lifter on the bottom of the
vehicle.
7
4
4
5
To Next Page
Loading...
