JAC T9 - A;C Control

180
A/C and infotainment system
S/N Function Description
①
Air volume OFF
Adjust the air volume of A/C: the larger the number, the
higher the fan speed.
②
Air volume up
Click this button. Press once and the air volume is
increased in turn until reaching Gear 8, the highest level.
③
A/C A/C compressor switch is used for A/C cooling.
④
Hazard warning indicator
Hazard warning switch is used when the vehicle is in a
dangerous situation.
⑤
Mode
A/C air outlet mode selector switch: Switch among face
mode, face and foot mode, foot mode, foot and defrosting
mode and defrosting mode.
⑥
Temperature up
Click this button to increase the temperature in turn, up to
HI.
⑦
Temperature down
Click this button to decrease the temperature in turn, until
LO reached.
Cooling, heating, defrosting, demisting
and any other related functions are
introduced below.
1. Adjust the air volume to the proper gear;
2. Press down A/C and icon for internal
circulation (Icon is ON);
3. Select the Face or Face and Foot mode
(mode icon is ON);
4. Adjust the temperature to the lowest
level and release the cold air.
Enable the max. cooling function when
setting temperature at "LO".
The following operation can be carried
out for rapid cooling in case of high
temperature in the vehicle in summer.
1. Open the door windows a little to expel
the hot air from inside;
2. Directly press down , and enable the
max. cool.
A/C control
Cooling
Max. cool (manual)
Ordinary cool (manual)
Max. cool (AUTO)
A/C