JAC T9 - Page 189

181
A/C and infotainment system
1
2
3
4
5
6
7
8
1. Disable the A/C icon (icon is OFF);
2. The air volume is regulated to the max.
gear;
3. Enable the internal circulation;
4. Select the Foot mode (Icon is ON);
5. Adjust the temperature to the highest
level and release the warm air.
Enable the max. heating function when
setting temperature at "HI".
1.Air volume control
Air volume under automatic control state:
● When the temperature is maintained at
LO, the air volume reaches Gear 8.
● When the temperature is maintained at
HI, the air volume reaches Gear 7.
2.Air outlet temperature control
The air outlet temperature is automatically
controlled by the A/C controller.
● When the temperature is maintained at
LO, the lowest temperature is reached.
● When the temperature is maintained at
1. Turn o the A/C switch (Icon is OFF);
2. Adjust the air volume to the proper gear;
3. Enable the internal circulation;
4. Select the Foot or Face and Foot mode
(Mode icon is ON);
5. Adjust the temperature to the proper
level and release the warm air.
Heating
Max. hot air (manual)
Max. warm air (AUTO)
Automatic (AUTO) control
Ordinary warm air (manual)
Notice Notice
● When the Face mode is enabled, at
least one air outlet on the instrument
panel shall be opened. Otherwise,
the cooling device may be frosted.
● Rapidly increase the temperature in
passenger area by enabling the max.
warm air mode, which however
cannot work for a long time.
Otherwise, the air quality inside the
vehicle will be negatively aected,
and the windows fog up.
● For demisting on the door window,
turn o the internal circulation
button so that fresh air enters.
HI, the highest temperature is reached.
3.Air outlet mode control
Air outlet mode under automatic control
state:
● When the temperature is maintained at
LO, Face mode is enabled as the air outlet
mode.
● When the temperature is maintained at
HI, Foot mode is enabled as the air outlet
mode.
(1)The air volume is regulated to the
proper gear;
(2)Press down the defrosting icon (Icon is
ON), and enable the external circulation;
(3)Adjust the temperature to the proper
warmness;
(4)For a rapid demisting or defrosting,
the air volume can be adjusted to the
max. gear, and the temperature can be
regulated to the highest level;
(5)To keep the front windshield clear
and allow the warm air to be directed
towards the feet, the Foot and
Defrosting mode can be selected and
enabled.
Defrosting and demisting in winter
(Manual)