JAC T9 - Driving Data

48
Instruments and control
Driving data
The driving data includes mileage, fuel
consumption, and tire pressure. You can
switch the display content through the
button on the right side of the steering
wheel.
Display Content Description
Speed It shows the current engine speed of the vehicle.
Driving mileage
It shows the current fuel level of the fuel tank and the number of miles
you can drive further;
The mileage is calculated in real time based on the fuel consumption
per minute. Due to dierent road and driving conditions, the displayed
mileage may not be consistent with the actual driving mileage;
When the mileage is less than 50km or the fuel sensor malfunctions, it
is displayed as "--".
Average fuel
consumption
By default, the average fuel consumption after the last memory empty
is displayed, in L/100 km;
Long press the button on the average fuel consumption display
interface, reset the average fuel consumption, and restart the
calculation;
If the instrument is disconnected from the battery, the average fuel
consumption will be reset.
Trip mileage
(TRIP)
The trip mileage indicates the distance traveled by a vehicle since the
last reset;
Long press the button on the average fuel consumption display
interface, reset the average fuel consumption, and restart the
calculation;
The range of the odometer is (0~999.9) km. The mileage is
recalculated from 0 after it reaches the upper limit.
23
C
o
12:20
ODO 320km TRIP 15km
X 1000rpm km/h
3.1
85
D
AM