JAC T9 - Rear Seat Adjustment; Seat Heating

53
Instruments and control
1
2
3
4
5
6
7
8
Seat cushion overturn
The rear seat cushion has an overturn
function. Pull the connecting cloth strip
of the rear seat cushion
①
, and release
the bottom locking hook to turn over
the cushion and connect the hook to the
headrest rod.
Backrest overturn
The backrest of the rear seats has a
turnover function. Pull up the connecting
cloth strip next to the backrest headrest
②
, and release the backrest locking hook
to turn over the backrest up and place it on
the cushion.
When your vehicle is equipped with seat
heating function and the ignition switch is
in the "ON" mode, click the seat heating
button or on the MP5 to activate
the seat heating function. Click again to
select the heating gear, and click "OFF" to
deactivate the seat heating function.
Never activate the seat heater in case of
any of the following circumstances:
1.No one is sitting in the seat;
2.The seat is equipped with a protective
cover;
3.The seat cushion is wet or damp;
4.The temperature inside or outside the
vehicle is higher than 25℃.
Rear seat adjustment Seat heating
Warning
● After each overturn, please conrm
whether the backrest is locked in
place. An unlocked backrest cannot
provide eective protection in
collision accidents and emergency
braking.
● Do not adjust the sear while driving.
1
1
2
1
2
18
OFF OFF
L
o
℃
1
2
18
OFF
OFF
L
o
℃
1
2
18
OFF
OFF
L
o
℃