JAC T9 - Panoramic Parking View System

135
Starting and driving
1
2
3
4
5
6
7
8
Panoramic parking view
system
The panoramic parking view system
generates panoramic images around a
vehicle by processing the multi-channel
videos captured by the 4 wide-angle
cameras mounted on the vehicle to cover
the range of viewing angles around the
vehicle. Finally, the panoramic images will
be displayed on the central console to help
the driver to conduct real-time monitoring
of the video images of the front, back, left
and right of the vehicle's external side to
avoid accidents.
The panoramic parking view system
seamlessly stitches the images captured by
the 4 cameras, but objects at the stitching
position will disappear. So you should
conrm whether there are objects at the
stitching position to ensure driving safety.
The view angle of the camera is xed, so
an area of 250 mm in front of and 150 mm
behind the vehicle will be the dead zone.
Objects in the dead zone can not be seen,
so before driving, please check whether
there are objects there to ensure driving
safety.
Warning
Warning
● Serious injury or death may be caused
if the warnings and instructions on the
proper use of the panoramic parking
view system are not followed.
● The panoramic parking view system
is a convenient function, but it can not
replace correct parking operations.
Before operating the vehicle, please
check the parking surroundings, and
check the rearview mirror to conrm
safe moving and ensure safe parking.
● The driver must concentrate when
driving, otherwise serious casualties
may be caused due to careless vehicle
moving.
● Special care should be taken to check
children and little animals because
ultrasonic sensors can't always detect
children, little animals, and objects.
● Do not scratch the camera lenses
when cleaning the dirt or snow on the
front of the camera.
● Objects at the stitching position will
disappear, so please check whether
there are objects at the stitching
position to ensure driving safety.
● Because of weak light at night, the
panoramic parking view system
will have "noises" which aect the
display eect of the images around
the vehicle. Please observe the
vehicle surroundings before starting
the vehicle to conrm driving safety.
● If the panoramic parking view
system is ineective, please contact
the after-sales service store to check
and repair it.
Notice
● Pay attention not to bump against
the bumper when driving in or out of
the parking spot, or else the sensors
in the bumper may be displaced or
damaged.
● When cleaning the vehicle with
pressure hoses and steam cleaners,
the sensor can just be washed for a
short term, and the distance between
the nozzle of the pressure hose and
the sensor should not be less than 10
cm.