JAC T9 - Automatic Headlamp; Position Lamp

60
Instruments and control
Automatic headlamp
The automatic headlamp function is to
automatically control the turning on and
o of the low beam, position lamp and
background lamp according to the light
strength of the external environment. When
the outside environment becomes dark
(such as when the vehicle drives at dusk or
night, or enters a tunnel), the light sensor
detects that the outside light is lower than
a certain brightness, and the low beam,
position lamp, and background lamp will
automatically illuminate. When the outside
environment lights up again, the lamp will
automatically go out with a delay.
On: Turn the ignition switch to "ON"
position, and turn the headlight adjustment
knob to the "AUTO" position to activate
the automatic headlight function.
O: When the headlamp adjustment knob
is turned to another position, the automatic
headlamp function is deactivated.
Notice
● There is a delay in starting the
automatic headlamp. When entering
a tunnel or suddenly darkening
environment, it is recommended to
turn on the low beam manually.
● When the vehicle is driving in a
bridge or under the shade of trees,
the headlamp may illuminate
because of the alternating light and
darkness.
● Heavy fog, thin fog, and smoke
can aect the brightness of the
environment. Therefore, heavy
fog during the daytime may cause
inaccurate detection of the light
sensor, and the automatic headlamp
function may fail. To avoid aecting
the driver's eld of view, please
manually turn on the lamps.
Notice
● The brightness of the position lamp
is not enough to illuminate the road
in front of the vehicle. Please turn on
the low beam in time when the sky is
dark or the visibility is poor.
Position lamp
The position lamp is used in an
environment with poor visibility, so that
other vehicles can distinguish the size and
position of their own vehicle.
On: When the headlamp adjustment
knob is turned to the " " position, the
position lamp will be turned on, and at
the same time, the background lamp and
license plate lamp of the instrument and
center console will be turned on.
O: Turn the headlamp adjustment knob
to the "AUTO" position to turn o the
position lamp in a bright environment.