Emergency
190
Chock wheels
Removal of tires
Place suitable stoppers at the front and rear
of the diagonally opposite wheels of the
at tire to prevent the vehicle from moving
when jacked up.
1. The wheel nut wrench is used to loosen
the wheel nuts counterclockwise in
sequence as shown in the gure, but do
not unscrew it o.
2. Turn the jack adjustment knob in
clockwise direction by hands, until the
height of jack reaches that of the lifting
position.
Warning
● Be sure to block the corresponding
wheels to prevent the vehicle from
moving, which may cause personal
injury.
6
1
4
2
5
3
To Next Page
Loading...
