62
Instruments and control
Rear fog lamp
Reversing lamp
The rear fog lamps are mainly used in
situations of poor visibility (such as rainy
and foggy weather) to remind vehicles and
pedestrians behind to keep away.
On: When the front headlamp adjustment
knob is in the " " or " " position,
and turn the rear fog lamp knob to the " "
position to turn on the rear fog lamps. The
knob will automatically return to the " "
position.
O: Turn the rear fog lamp knob to the
" " position again to turn o the rear fog
lamps.
Reversing lamps help light up the road
behind the vehicle when you are reversing
the vehicle, and attract the attention of
vehicles and pedestrians behind.
On: When the vehicle is in the "R"
gear, the reversing lamp will light up
automatically.
O: When the vehicle is not the "R"
gear, the reversing lamp will go out
automatically.
Notice
● After you turn on the turn signal
lamp, if the turning angle is small,
the light control lever may not
automatically return to the middle
position after a turning. At this time,
it is necessary to manually return the
light control lever to turn o the turn
signal lamp.
Turn signal lamp
When a vehicle needs to turn or change
lanes, turn on the turn signal lamp in
advance to remind other vehicles or
pedestrians of your driving direction.
On: Pull down the light control lever. The
left turn signal lamp is turned on, ashes,
and makes a "beep" sound.
Lift the light control lever up. The right
turn signal lamp is turned on, ashes, and
makes a "beep" sound.
O: After turning is complete, the light
control lever automatically returns to the
middle position, and the turn signal lamp
is automatically o.
License plate lamp
Daytime running lamp
When the position lamp or headlamp
is turned on, the license plate lamp will
automatically light up, which provides
vehicle license plate information to other
vehicles and pedestrians at night.
The daytime running lamps are mainly
used in the daytime, so that the vehicles
ahead and opposite can notice the position
of your vehicle.
When the ignition switch is in the
"ON" position and the parking brake is
released, the daytime running lamp will
automatically light up. When the position
lamp is turned on, the brightness of the
daytime running lamp will dim.
To Next Page
Loading...
