EasyManua.ls Logo

JAC T9 - Cruise Control System; Activating or Deactivating the Reversing Visual System

JAC T9
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
142
Starting and driving
Notice
● The display screen can only display
two-dimensional images captured by
the cameras. The display screen can't
display the depth of the space, so it
may not detect pits on the roads or
objects above the roads.
● The cameras can't always detect
objects such as thin railings, fences,
pillars, and trees that may damage
the vehicle.
Activating or deactivating the
reversing visual system
Activating the reversing visual
system
Deactivating the reversing visual
system
When the ignition switch is in the "ON"
position, switch the gear shift to R, and
the reversing visual system will start and
the multi-media screen in the vehicle
will display the images of the rear of the
vehicle.
Leave R, and the reversing visual system
will shut down.
Cruise control system
While driving at high speed on straight,
smooth highways, the cruise control
system allows the user to keep the vehicle
at a certain speed without stepping on the
accelerator pedal for extended periods of
time.
Warning
To avoid misusing the cruise control
system, if you do not use it, turn the
cruise control system o timely.
Incorrect use of the cruise control
system can lead to collision
accidents.
You should only use CCS when there
is good weather and the vehicle
is traveling on a straight highway.
Using the cruise control system in
urban areas, on meandering roads,
on wet and slippery roads, or in other
adverse weather conditions is not
recommended.
● Do not use the cruise control system
when traveling on slopes.
The driver must not leave his or her

Table of Contents

Related product manuals