JAC T9 - Speed Limit Assist(SLA); Intelligent Adaptive Cruise Control(IACC); Function Introduction

171
Starting and driving
1
2
3
4
5
6
7
8
Notice
● The trac sign information function
can only function normally when the
speed sign is clearly visible. Unable
to function or function properly
when the logo is unclear.
● The system recognizes speed limit
signs, and the default speed unit is
km/h.
● When multiple speed limit signs are
tied together, the system will display
the maximum speed limit value.
Please refer to the actual speed limit
value of the current lane.
● When the vehicle is turning, speed
signs may not be recognized.
After the trac sign recognition function
is activated, the intelligent speed limit
assistance function can be activated.
After the trac sign recognition function
detects the speed limit information on both
sides of the road, when the driver exceeds
the speed limit, the indicator light on the
combination instrument will ash and the
vehicle will sound an alarm, reminding
the driver to reduce the speed to the
appropriate range as soon as possible.
After the Trac Sign Recognition (TSR)
function is activated, theIntelligent
Adaptive Cruise Control(IACC)system
can be activated.
After activating IACC, when using
Adaptive Cruise Control (ACC), the
system will compare the cruise speed
set by the cruise control system with the
current road speed limit sign, and prompt
the user to increase or decrease the cruise
speed set value through the instrument
panel.
Usage method
When the vehicle passes the speed limit
sign, the instrument speed limit sign
ashes and prompts the up or down arrow.
At this time, the button on the left
side of the steering wheel can receive
the current road speed limit value as the
cruising speed set value. If the button
is not operated before the speed limit sign
stops ashing, the previous cruising speed
set value will be maintained.
Speed Limit Assist(SLA) Intelligent Adaptive Cruise
Control(IACC)
Function Introduction