JAC T9 - Page 22

14
Safety
Symbol Description
Suitable for all mass and size groups of universal category CRS xed with vehicle seat belt.
Not suitable for CRS installation.
Suitable for i-Size and ISOFIX CRS.
Seat equipped with a top tether anchorage.
When the passenger side front airbag is activated by Airbag Switch, the use of a rear facing CRS system is prohibited,
and a forward facing system can be used;
When there is a passenger side airbag switch and the airbag is turned o, both forward and backward facing CRS
systems can be used.
If the seat can be moved back and forth, slide the passenger seat all the way backward.
Raise the seatback so it is fully upright. If there is a gap between the seatback and the CRS, adjust the seat to reduce the
gap.
Before installing the CRS, remove the headrest. When using only a booster cushion, put it in the use position without
removing the headrest.
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4
U
L
X
*
1
*
2
*
3
*
4