JAC T9 - Page 47

39
Instruments and control
1
2
3
4
5
6
7
8
1. Battery fault warning light (red)
When the ignition switch
is in the "ON" position,
this warning light will light
to until the engine starts,
indicating that the system is in normal
working condition.
If the warning light continues to light up
after the engine is started, or lights up
during driving, or does not light up when
the ignition switch is in the "ON" position,
it indicates a malfunction in the charging
system. At this point, immediately disable
all non-essential electrical accessories such
as radios, air conditioning, and indoor
lighting, and contact an after-sales service
store for maintenance as soon as possible.
2. Anti-lock braking system (ABS)
fault warning light (yellow)
3. Braking system fault warning
light (red)
When the ignition switch
is in the "ON" position,
the system rst performs a
self-check. The ABS fault
warning light lights up for a few seconds
and then goes out, indicating that the
system is in normal working condition.
When the ignition switch
is in the "ON" position, the
system rst performs a self-
check. The braking system
fault warning light lights up for a few
seconds and then goes out, indicating that
the system is in normal working condition.
If this warning light continues to light up,
or lights up during driving, or does not
light up when the ignition switch is in the
"ON" position, it indicates a low brake
uid level or a brake malfunction. At this
point, contact an after-sales service store
as soon as possible for maintenance.
If this warning light lights up during
driving, stop the vehicle safely
If this warning light continues to light up,
or lights up during driving, or does not
light up when the ignition switch is in the
"ON" position, it indicates a malfunction
in the ABS system. At this time, the
braking system can still work normally,
but the anti-lock braking system does
not work. At this point, contact an after-
sales service store as soon as possible for
maintenance.
immediately, stop the engine, and then
restart the vehicle once or twice. If this
warning light continues to light up, do
not drive the vehicle and immediately
contact an after-sales service store for
maintenance.
4. Engine oil pressure warning light
(red)
When the ignition switch
is in the "ON" position, the
engine oil pressure warning
light will light to until the
engine starts, indicating that the system is
in normal working condition.
Warning
● When the braking system fails, the
brake pedal may be pressed harder
or closer to the oor, resulting in
a signicant decrease in braking
performance, which may lead to
accidents. Please stop the vehicle
safely immediately and contact
an after-sales service store for
maintenance.