Juniper EX4300 Series

Table 30: Details of the AC Power Supplies in EX4300 Switches
Details 350 W AC Power
Supply
715 W AC Power
Supply
1100 W AC
Power Supply
1400 W AC
Power Supply
Model number
• JPSU-350-AC-
AFO-A
• JPSU-350-AC-
AFI-A
JPSU-715-AC-
AFO-A
JPSU-1100-AC-
AFO-A
JPSU-1400W-AC-
AFO
Field-replaceable unit
(FRU) type
Hot-insertable and
hot-removable
Hot-insertable
and hot-
removable
Hot-insertable
and hot-
removable
Hot-insertable
and hot-
removable
Power supply weight 2.43 lb (1.1 kg) 2.43 lb (1.1 kg) 2.43 lb (1.1 kg) 3.06 lb (1.39 kg)
Minimum installed in
chassis
1 1 1 1
Maximum installed in
chassis
2 2 2 2
Power supply slots Install in power
supply slots labeled
PSU 0 and PSU 1 in
the rear panel of the
chassis.
Install in power
supply slots
labeled PSU 0 and
PSU 1 in the rear
panel of the
chassis.
Install in power
supply slots
labeled PSU 0 and
PSU 1 in the rear
panel of the
chassis.
Install in power
supply slots
labeled PSU 0 and
PSU 1 in the rear
panel of the
chassis.
AC appliance
Inlet
NOTE: Each
AC appliance
inlet requires a
dedicated AC
power feed.
Numbe
r
1 1 1 1
Type IEC-320-C13 IEC-320-C13 IEC-320-C15 IEC-320-C15
93