Juniper EX4300 Series

• EX4300-48T-S
• EX4300-48P-S
Uplink modules and transceivers are not part of the shipping conguraon. If you want to
purchase any of these components, power supplies, or fan modules for your switch, you must
order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addion, change, or upgrade of
hardware components at hps://www.juniper.net/customers/support/tools/updateinstallbase/ .
Failure to do so can result in signicant delays if you need replacement parts. This note does not
apply if you replace exisng components with the same type of component.
SEE ALSO
Installing and Removing EX4300 Switch Hardware Components
EX4300 Chassis
IN THIS SECTION
LCD Panel in EX4300 Switches | 54
Uplink Modules in EX4300 Switches | 59
Chassis Status LEDs on EX4300 Switches | 69
Management Port LEDs on EX4300 Switches | 72
Network Port, Built-In QSFP+ Port, Uplink Port, and Uplink Module Port LEDs on EX4300 Switches | 74
53