Juniper EX4300 Series User Manual

Agency Approvals for EX Series Switches
IN THIS SECTION
Compliance Statement for Argenna | 397
This topic applies to hardware devices in the EX Series product family, which includes EX Series
switches, the EX Series Redundant Power System (RPS), and the XRE200 External Roung Engine.
These hardware devices comply with the following standards:
• Safety
• CAN/CSA-C22.2 No. 60950-1 Informaon Technology Equipment
• UL 60950-1 Informaon Technology Equipment
• EN 60950-1 Informaon Technology Equipment
• IEC 60950-1 Informaon Technology Equipment
• EN 60825-1 Safety of Laser Products - Part 1: Equipment classicaon and requirements
• EMC
• FCC 47CFR Part 15 Class A (USA)
• EN 55022 Class A Emissions (Europe)
• ICES-003 Class A
• VCCI Class A (Japan)
• AS/NZS CISPR 22 Class A (Australia/New Zealand)
• CISPR 22 Class A
• EN 55024
• EN 300386
• EN 61000-3-2 Power Line Harmonics
• EN 61000-3-3 Voltage Fluctuaons and Flicker
396

Juniper EX4300 Series Specifications

General

Product Series	EX4300 Series
Power Consumption	Varies by model and configuration
Virtual Chassis Technology	Up to 10 switches
Software	Junos OS
Ports	24-port and 48-port models
10GBASE SFP+ Ports	Up to 8 ports
40GBASE QSFP+ Ports	2
Uplink Ports	Up to 4 ports
Jumbo Frames	Up to 9216 bytes
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 90% noncondensing
Input Voltage	100 to 240V AC
Power Supply	AC or DC
Power Supply Options	AC or DC
Stacking	Yes
Layer 2 Features	Includes VLAN, STP, RSTP, MSTP, LACP
Layer 3 Features	OSPF, BGP
Management	CLI, Web GUI, SNMP
Security Features	DHCP snooping
QoS	8 queues per port, DSCP
Storage Temperature	-40°C to 70°C