Locang the Serial Number on an EX4300 Switch or Component
IN THIS SECTION
Lisng the Switch and Components Details with the CLI | 343
Locang the Chassis Serial Number ID Label on an EX4300 Switch | 344
Locang the Serial Number ID Labels on FRUs in an EX4300 Switch | 346
If you are returning a switch or hardware component to Juniper Networks for repair or replacement, you
must locate the serial number of the switch or component. You must provide the serial number to the
Juniper Networks Technical Assistance Center (JTAC) when you contact them to obtain Return Materials
Authorizaon (RMA).
If the switch is operaonal and you can access the CLI, you can list serial numbers for the switch and for
some components with a CLI command. If you do not have access to the CLI or if the serial number for
the component does not appear in the command output, you can locate the serial number ID label on
the physical switch or component.
NOTE: If you want to nd the serial number on the physical switch component, you will need to
remove the component from the switch chassis, for which you must have the required parts and
tools available. See Installing and Removing EX4300 Switch Hardware Components.
Lisng the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the following CLI command:
show chassis hardware
The following output lists the switch components and serial numbers for an EX4300-48P switch:
user@switch> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis PD3113060008 EX4300–48P
Routing Engine 0 REV D 650-044930 PD3113060008 EX4300-48P
FPC 0 REV D 650-044930 PD3113060008 EX4300-48P
CPU BUILTIN BUILTIN FPC CPU
343
To Next Page
Loading...
Need help?
General
