EasyManua.ls Logo

Juniper EX4300 Series

Juniper EX4300 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecng QFX Series and EX Series Switches in a QFX Virtual Chassis
IN THIS SECTION
Before You Start | 214
Valid Conguraons | 215
Cabling QFX3500 Switches in a QFX5100 Virtual Chassis | 217
Cabling QFX3600 Switches in a QFX Virtual Chassis | 219
Cabling a Mixed QFX Virtual Chassis | 219
In a QFX Virtual Chassis, you can connect up to 10 standalone QFX5100, QFX3600, QFX3500, and
EX4300 switches except EX4300-48MP and EX4300-48MP-S switches into a QFX Series Virtual
Chassis and manage the interconnected switches as a single chassis. Unlike a Virtual Chassis Fabric
(VCF), which is cabled in a spine and leaf topology, the QFX Virtual Chassis is cabled in a ring topology.
For Virtual Chassis Fabric cabling examples, see Connecng a QFX5100 Device in a Virtual Chassis
Fabric.
As of Junos Release 17.3R1, you can also connect select models of the QFX5100 in the line card role in
a QFX5110 Virtual Chassis. See Connecng QFX5110 and QFX5100 Members in a QFX5110 Virtual
Chassis.
This topic describes how to cable QFX Series switches and EX4300 switches into a QFX Virtual Chassis.
Before You Start
You congure a QFX Series Virtual Chassis by conguring the switch interfaces into Virtual Chassis ports
(VCPs). VCPs connect switches together to form a Virtual Chassis, and are responsible for passing all
data and control trac between member switches in the Virtual Chassis. All non-channelized QSFP+
uplink interfaces on standalone QFX5100 switches can be congured into VCPs. All xed SFP+
interfaces on QFX5100-96S switches can also be congured into VCPs.
Use the following interfaces to create VCPs:
On QFX5100, non-channelized QSFP+ uplink interfaces. All xed SFP+ interfaces on the
QFX5100-96S switches are also available.
On EX4300 switches, the built-in QSFP+ ports are dedicated VCPs by default. In 48-port EX4300
switches except EX4300-48MP and EX4300-48MP-S switches, you can use the QSFP+ ports as
network ports or as VCPs. You can also use the SFP+ uplink module ports as VCPs by conguring
these ports as VCPs.
214

Table of Contents

Related product manuals