EasyManuals Logo

Juniper EX4300 Series User Manual

Juniper EX4300 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #370 background imageLoading...
Page #370 background image
Some parts of the chassis, including AC and DC power supply surfaces, power supply unit handles,
SFB card handles, and fan tray handles might become hot. The following label provides the warning
for hot surfaces on the chassis:
Always ensure that all modules, power supplies, and cover panels are fully inserted and that the
installaon screws are fully ghtened.
Denions of Safety Warning Levels
The documentaon uses the following levels of safety warnings (there are two
Warning
formats):
NOTE: You might nd this informaon helpful in a parcular situaon, or you might overlook this
important informaon if it was not highlighted in a Note.
CAUTION: You need to observe the specied guidelines to prevent minor injury or
discomfort to you or severe damage to the device.
Aenon Veillez à respecter les consignes indiquées pour éviter toute incommodité ou
blessure légère, voire des dégâts graves pour l’appareil.
LASER WARNING: This symbol alerts you to the risk of personal injury from a laser.
Averssement Ce symbole signale un risque de blessure provoquée par rayon laser.
WARNING: This symbol means danger. You are in a situaon that could cause bodily
injury. Before you work on any equipment, be aware of the hazards involved with
electrical circuitry, and familiarize yourself with standard pracces for prevenng
accidents.
360

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX4300 Series and is the answer not in the manual?

Juniper EX4300 Series Specifications

General IconGeneral
Product SeriesEX4300 Series
Power ConsumptionVaries by model and configuration
Virtual Chassis TechnologyUp to 10 switches
SoftwareJunos OS
Ports24-port and 48-port models
10GBASE SFP+ PortsUp to 8 ports
40GBASE QSFP+ Ports2
Uplink PortsUp to 4 ports
Jumbo FramesUp to 9216 bytes
Operating Temperature0°C to 45°C
Relative Humidity5% to 90% noncondensing
Input Voltage100 to 240V AC
Power SupplyAC or DC
Power Supply OptionsAC or DC
StackingYes
Layer 2 FeaturesIncludes VLAN, STP, RSTP, MSTP, LACP
Layer 3 FeaturesOSPF, BGP
ManagementCLI, Web GUI, SNMP
Security FeaturesDHCP snooping
QoS8 queues per port, DSCP
Storage Temperature-40°C to 70°C

Related product manuals